Swap Meet??

[luvnlife275]

Should we try to organize a swap meet like last year. Anyone that has misc. boat stuff laying around can post it on here and bring to to the party?? Just a thought. Is that ok DJ? [smilie=042.gif]

[Hell Ya!]

I'm in, I will get a list together with prices and post it the first of the week.

[crownie02]

Hey Jeff, got anything to improve a little old 502 mag?

[Tempest38]

Yall - I'll see if I can get a few things together before the party. I can deliver any and all to the party. Here's a start.

Boats
Either boat can be bought Without power or with your choice of New (5 hours) 540's, New unfired 454's, Mercruiser 454ci 400hp motors, one just professionally rebuilt, the other was fine or 502ci 415hp carbed closed cooling motors and the price depends on which power.
*Excalibur 40' Hawk Offshore boat, twin BBC's on Nice triple axle trailer.
*Tempest 38' Offshore boat with twin BBC's on Nice triple axle trailer.
Safety Equipment
*Simpson full face helmet, white, 7 5/8? $100.00.
*???? full face helmet, white. 71/2? $50.00.
*Life Line chute jacket for drag boat. Excellent condition with LL carrying bag. Recertified since used.$500.00.
*Simpson? Drag race /20 2 piece firesuit and /15 gloves and boots not used since sent off for certification. Good for any blown class up to and including Fuel dragster and Fuel Funny Car. $750.00/OBO.
Motors/Parts BBF & BBC
*Ford Motor Sport 460 550hp aluminum head crate motor Never Started. Engine only $4800.00/OBO.
*New never used MSD # 8580 distributors (2) for 351c/429/460. $185.00 each.
*Used Mallory Magneto and coil for 351c/429/460. $350.00.
*Moroso aluminum water pump with Moroso electric water pump drive for 429/460. $100.00.
*New Polished Aluminum CSI electric self contained water pump for 429/460. $285.00.
*FMS polished Valve covers for 429/460. Sent to polishers after I bought 'em and they're still in the box with No breathers (included) holes drilled yet. $150.00.
*Weiand NEW dual dominator tunnel ram top for 429/460. $75.00.
*New Dual Dominator plate system, adjustable with jets. 3 HiFlow bottles available.
*Enderle splined linkage (2) for sideways Dominators on tunnel ram. $100.00 each.
*Lunati NEW in plastic roller rockers for 351c/429/460. $200.00.
*Jerry Bickel Prostock strut chassis style 429/460 headers like NEW. $650.00.
*Boss 429 strut chassis Jerry Haas headers. $650.00.
*Boss 429 boat or dragster headers. $400.00.
*Ram 429/460 aluminum bare as in bare multi disc flywheel. $125.00.
*Steel 429/460 clutch can 8 1/8" deep with starter pocket. $500.00.
*Titanium Can, new candlestick for 429/460 with pocket. $2000.00.
*AFT 10" Fresh dual disc clutch for 429/460 with weights etc. $1500.00.
*Lenco 2:37 low CS1 4 speed with Hurst shifters. $4000.00/OBO.
*Canton oil pan for V-Drive boat, as in the motor is BACKWARDS, with pickup for 429/460. $300.00.
*Harmin front drive timing cover for 429/460 Ford with drive stub and acc's. $350.00.
*Polished front cover for 429/460 jet boat. $50.00.
*Polished thermostat housing with split hose tips for 429/460 boat. $30.00.
*Polished bellhousing for 429/460 boat. $125.00.
*"PTO" drive for 429/460 boat or other application. $35.00.
*NOS bellhousing w/ top and bottom starter pockets for 429/460 boat. $125.00.
*Canton flat bottom pan and pickup with kickout for 429/460 . $300.00.
*Canton flat bottom pan with partial kickout and pickup for 429/460. $300.00.
*JAZ Brand New Black 5 gallon upright fuel cell. $100.00.
*(2) JAZ Brand New Black overflow tanks with drians. $35.00 pair.
*(2) TCI Ford 429/460 to Chevy turbo/'glide flywheels. $150.00 each.
*BBC pickup? headers. $40.00.
*Gil Marine BBC offshore oil pan with built in scraper lalala and pickup. $300.00.
*BBC chrome v/c's new. $20.00.
*BBC front drive timing cover for fuel pump. $50.00.
Vehicles/Trailers
*67 AC Cobra Kit car rolling with new 428 2x4 4 speed. $13,000.00.
*67 Chevy II SS rolling narrowed frame project. $3000.00.
*Chevy TopKick Toterhome. $16,000.00.
*95 F350XLT Powerstroke auto crewcab dually. $8500.00.
*Chevy mini blazer 4.3 4wd auto. $1500.00.
*Flatbed 16' car trailer, aluminum fenders,nice. $1000.00. New Eagle 058 wheels avail.
Garden Tractors/Mowers/Tractor
*Ford 841D 46hp diesel tractor with front loader and rear blade. $4500.00.
*Sears 12hp with snowblower. $500.00.
*Sears 16hp single cylinder motor. Runs good.$500.00.
*Sears 16hp twin cylinder Kohler? motor. Runs good.$500.00.
*3 3point setups.
*3 mower decks.
*2 plows
*2 front blades.
*Harrow.
*Sears 16hp parts tractor.
*Sears 19.5hp parts tractor.
*Dixon early model ZTR mower.
Motorcycles/4 Wheelers/Sandrails
*Suzuki jr 50 dirt bike. $500.00.
*Yamaha 80 fat tire dirt bike. $700.00.
*Yamaha 1971 175 enduro project with title. $250.00.
*Yamaha 1972 175 enduro runs with title. $600.00.
*Yamaha 1973 125 enduro project. $250.00.
*Yamaha 1973 175 enduro project. $200.00.
*Yamaha 1975 175 frame and parts. $150.00.
*Yamaha 1973 250 enduro, nice, runs, title. $1200.00.
*Yamaha 1973 360 enduro, nice, runs, title. $1400.00.
*Yamaha 1998 YZ250, new plastic. $1800.00.
*Yamaha 1998 Warrior 4 wheeler. $1700.00.
*Sand rail frame and parts, 2 seater, disassembled. $700.00.
Generators
*Kohler cast iron 3500W electric start out of motorhome. $400.00.
*Onan cast iron 5000W twin cylinder motorhome style generator. $600.00.

[SuperV]

You forgot the kitchen sink [smilie=265.gif]

[Tempest38]

It's coming along with the bathroom sink. Need to do a little cleaning out.

[obnoxus21]

Well in this case :roll: Boat must go for new home or for other opportunity(no more boat shopping [smilie=011.gif] time for new house :oops: )

-1982 38' KV Scarab
-1996 retro-fit (paint and cockpit) Stl. boat show feature
-2003 dash
-Winter '05/'06 motors
-B&W Trans
-2005 New TRS Drives w/ Bravo I 4 blades(soon to be changed after testing from new motors)
-Well maintained(oil and drives twice per season)
-Cockpit carpet
-1994 Freedom Wheels tri-axle trailer
-600 hull hrs.
-Big stereo
-Original motors by Competition Marine now building 500hps
-Available now w/o power or new power spring

Make an offer on a solid classic boat 30k [smilie=rocker] [smilie=bc.gif] ,
Justin a/k/a OB12
785-760-3306

[bustag]

How bout some fotos??

Sounds like one hell of a package.

[obnoxus21]

All photos were on my old PC that's officially been trashed. I will get some more this spring and seriously advertise it once the new motors are in and running :oops:

[bustag]

Cool. I may know someone.

[AMER3]

496 motor missing carb and dist .just back from machince shop

[bustag]

Anyone have any mechanical trim indicators laying around?

twin drive, with or without tabs.

Also a 21p 4 blade Bravo prop. (right hand)

[KCHOTBOAT]

It's coming along with the bathroom sink. Need to do a little cleaning out.
Post some pics of the 67 Chevy II SS I would like to see it.

[Hell Ya!]

T-38...Do you know the rating on the Simpson helmet? and if you want bring the BBC front Timing cover for fuel pump I would like to look.

[Hell Ya!]

Anyone got a nice pair of 30" 4 blades or 28 or 30" 5or6 blade herrings laying around?

Also in the market for a nice aluminum 4 or 5 step dock ladder that hindges up.

[Tempest38]

KC - for the ChevyII go to http://www.racingjunk.com/exec/ca/mine/
Also look where it says see sellers other ads THEN go to Ad #555617 THEN look at sellers other ads from there too. There are pics and info of a lot of the stuff I have listed. Most parts are negotiable.
HY - I'll check the helmet when I'mm at the shop and bring the timing cover along.

[KCHOTBOAT]

Still could not find the picture of the car. Found your other stuff.

[Tempest38]

Ok that was my other acount. Try this. Then go to my other ads here also. It's a project but should know about a title this week. And I could probably do some trading.

http://www.racingjunk.com/exec/ca/view/551495/67-Chevy-II-Super-Sport-Roller-body-tubbed.html

[Griff]

How bout some fotos??

Sounds like one hell of a package.

Here's a pic of obnoxus21's boat

[Griff]

Anyone have any mechanical trim indicators laying around?

twin drive, with or without tabs.

Also a 21p 4 blade Bravo prop. (right hand)

[smilie=126.gif] [smilie=126.gif] [smilie=126.gif] [smilie=126.gif]

Bravo Props only come in even pitch numbers and start at 22"

[bustag]

Anyone have any mechanical trim indicators laying around?

twin drive, with or without tabs.

Also a 21p 4 blade Bravo prop. (right hand)

[smilie=126.gif] [smilie=126.gif] [smilie=126.gif] [smilie=126.gif]

Bravo Props only come in even pitch numbers and start at 22"

Brain Fart [smilie=265.gif]

Bravo 1 22p 4 blade. (right hand)

My bad.

[bustag]

Anyone got a nice pair of 30" 4 blades or 28 or 30" 5or6 blade herrings laying around?

Also in the market for a nice aluminum 4 or 5 step dock ladder that hindges up.

Hell Yeah, I know where there are a couple of those ladders a few docks down from you. Once it's dark we could............... :twisted:

[bustag]

Can anyone use these. If you want them I'll bring them to KC and toss them in your trunk. 454 thermostat housings without temp sensors. They are good but I changed mine out when I changed over to Revolution Marine exhaust.

The price is right........................FREE.

[KCHOTBOAT]

Can anyone use these. If you want them I'll bring them to KC and toss them in your trunk. 454 thermostat housings without temp sensors. They are good but I changed mine out when I changed over to Revolution Marine exhaust.

The price is right........................FREE.
I will take them. I have been looking for one. What kind of beer do you drink?

[Dr. Jeff]

I called them first, I want to put them in my...... oh who the hell am I kidding, I don't even know what the hell they are :oops:

Noone ever got me confused with a gearhead!!! :mrgreen:

[bustag]

Can anyone use these. If you want them I'll bring them to KC and toss them in your trunk. 454 thermostat housings without temp sensors. They are good but I changed mine out when I changed over to Revolution Marine exhaust.

The price is right........................FREE.
I will take them. I have been looking for one. What kind of beer do you drink?

They're yours. I'll try to clean them up a bit.

As for the beer type...................Cold :mrgreen:

[bustag]

I called them first, I want to put them in my...... oh who the hell am I kidding, I don't even know what the hell they are :oops:

Noone ever got me confused with a gearhead!!! :mrgreen:

DJ I have something special for you. I just have to figure out where to attach the electrodes, watch batteries and timer.


Remember: DONT cut the BLUE wire.


or is the red wire :oops:



shit


I'll get back to you .

[Dr. Jeff]

I called them first, I want to put them in my...... oh who the hell am I kidding, I don't even know what the hell they are :oops:

Noone ever got me confused with a gearhead!!! :mrgreen:

DJ I have something special for you. I just have to figure out where to attach the electrodes, watch batteries and timer.


Remember: DONT cut the BLUE wire.


or is the red wire :oops:



shit


I'll get back to you .

I'll just cut the one with the chocolate frosting. More than likely that's the last one you would have hooked up. [smilie=265.gif] :mrgreen: :mrgreen:

[bustag]

Oh, I get it! A Donut slam huh??????????


You know me well :lol: The only Green food I eat is Mint chocolate chip ice cream and Green frosting.

Gotta keep my girlish figure.

[Dr. Jeff]

Oh, I get it! A Donut slam huh??????????


You know me well :lol: The only Green food I eat is Mint chocolate chip ice cream and Green frosting.

Gotta keep my girlish figure.

The donut jokes just never get old....... okay never get old to me, but then again I'm simple [smilie=crazy]

[bustag]

:mrgreen: :mrgreen: :mrgreen:

[DJMALCOM]

Oh, I get it! A Donut slam huh??????????


You know me well :lol: The only Green food I eat is Mint chocolate chip ice cream and Green frosting.

Gotta keep my girlish figure.

You guys have no idea how true this comment is. All that is in his freezer are bomb pops and ice cream!!!

[bustag]

:mrgreen: Yummy! Real food [smilie=050.gif]

[DoubleBlended]

What no sandwitches!!!?????

[scottfree]

I called them first, I want to put them in my...... oh who the hell am I kidding, I don't even know what the hell they are :oops:

Noone ever got me confused with a gearhead!!! :mrgreen:

Busta do I have those on my boat? Should I?

[bustag]

yes and yes. :mrgreen:

[who knows]

anyone need a load equalizing hitch. came with the boat and I do not need. would work with a boat trailer, camper, or large enclosed trailer.

MM

[mnfastboat]

anyone need a load equalizing hitch. came with the boat and I do not need. would work with a boat trailer, camper, or large enclosed trailer.

MM

will this uunit work with surge brakes?

[who knows]

It came on my trailer and it has surge. I would think that the chains would allow for the movement of the master? Any one else know.

[bustag]

Anyone need tires.

4 used Goodyear Wrangler RTS m&s. 4/32 of rubber left. P235/75-15

great trailer tires.

make an offer

[DoubleBlended]

you need a garage sale!! You might wanna upgrade your 8-track payer!!!

[bustag]

I needs me some new tapes. :mrgreen:

[DoubleBlended]

I needs me some new tapes. :mrgreen:

i didn't notice when did you take it out of the boat????

[obnoxus21]

How bout some fotos??

Sounds like one hell of a package.

Here's a pic of obnoxus21's boat

Thanks Griff :mrgreen: What a weekend that was :oops: :twisted: [smilie=126.gif] Now I finally have a pic of my boat on the 'puter [smilie=071.gif]

You coming to the party???

Justin a/k/a OB21

[wildchild212]

busta, what are you using a 22 pitch prop for? I have a 23p revolution four blade cheap. If you want you can try it out this spring, and if it works we will figure out a price. If it dont, bring it to the rat rally or the poker run.

[bustag]

busta, what are you using a 22 pitch prop for? I have a 23p revolution four blade cheap. If you want you can try it out this spring, and if it works we will figure out a price. If it dont, bring it to the rat rally or the poker run.
I have a left hand and need the right for the Stinger. With 23 3 blade I'm only hitting around 4200 rpms. Just trying to dial it in a little better. Thanks for the offer. I may have one on the hook. I'll keep you posted. :mrgreen:

[wildchild212]

not a problem man. If you know of any one that might be interested I will let er go cheeeaaap.

[bustag]

not a problem man. If you know of any one that might be interested I will let er go cheeeaaap.
I'll send up some smoke signals. [smilie=042.gif]

sorry amer3 :oops: :mrgreen:

I'll pass the word around.

[bustag]

Anyone need tires.

4 used Goodyear Wrangler RTS m&s. 4/32 of rubber left. P235/75-15

great trailer tires.

make an offer





Gone.

[John P]

I've got a Y pipe, bell housing, new power steering pump hoses and slave cylinder, new trim pump, new motor mounts, used lower unit plastic reservoir and anything off this 4.3 motor which has a cracked block. Motor only had 114 hours on it. Will sell all or parts of it.

I also have an aluminum dump box to fit into an eight foot pickup bed and a hitch for a 3600 Kinze Planter.

[John P]

Rest of pictures

[dunnit]

not a problem man. If you know of any one that might be interested I will let er go cheeeaaap.

[smilie=042.gif] w/c...sent you a pm!

[John P]

Here's the hitch

[ya never know]

Well in this case :roll: Boat must go for new home or for other opportunity(no more boat shopping [smilie=011.gif] time for new house :oops: )

-1982 38' KV Scarab
-1996 retro-fit (paint and cockpit) Stl. boat show feature
-2003 dash
-Winter '05/'06 motors
-B&W Trans
-2005 New TRS Drives w/ Bravo I 4 blades(soon to be changed after testing from new motors)
-Well maintained(oil and drives twice per season)
-Cockpit carpet
-1994 Freedom Wheels tri-axle trailer
-600 hull hrs.
-Big stereo
-Original motors by Competition Marine now building 500hps
-Available now w/o power or new power spring

Make an offer on a solid classic boat 30k [smilie=rocker] [smilie=bc.gif] ,
Justin a/k/a OB12
785-760-3306


e-mail jpfanner he was looking for something like this. he is a member on this site. good luck I remember seeing this boat at the loto. sounds like a good deal!

[ASH]

Here's the hitch


Is that your shop???? It looks like you have stamped out a bunch of hitches, do the guys in Williamsburg know about this????


It wont do me any good, we have a 71' X 10" Peck auger with a swing under hopper for sale if you know anyone looking. I probably wont bring it to the swap meet, after all I think it is more for boat parts not farm parts. [smilie=042.gif] [smilie=042.gif] [smilie=042.gif]

[John P]

Here's the hitch


Is that your shop???? It looks like you have stamped out a bunch of hitches, do the guys in Williamsburg know about this????


Yes, that is my shop. We made 5 hitches so far and are working on 4 more. We haven't shown it to Kinze, but some of their dealers around here are selling them.

[BabyNitro]

busta, what are you using a 22 pitch prop for? I have a 23p revolution four blade cheap. If you want you can try it out this spring, and if it works we will figure out a price. If it dont, bring it to the rat rally or the poker run.

Show me some pics. I may be interested depending on condition and price. I will not be at the party. PM me with more info if its still available.

[Hell Ya!]

I have a set of 20" MOTO wheels and eagle GT 2 tires for a 6 bolt GM truck or SUV ans also a set of 4 Billet specialties wheels and GT 2's 15" like new that would make a great set of trailer wheels.

[bustag]

I have a picture of Melissa and Diane (Mrs Hell Yeah) pole dancing on the dock I could let go for a reasonable price :lol:


Diane quote: I feel tingley all over :lol: :lol:

[Hell Ya!]

I have a picture of Melissa and Diane (Mrs Hell Yeah) pole dancing on the dock I could let go for a reasonable price :lol:


Diane quote: I feel tingley all over :lol: :lol:

Ahh yes......the DB blender poisen!!!!

[h2oboy]

I have a picture of Melissa and Diane (Mrs Hell Yeah) pole dancing on the dock I could let go for a reasonable price :lol:


Diane quote: I feel tingley all over :lol: :lol:



You should save that for a charity auction. It would undoubtably bring a lot of money!! [smilie=050.gif]

[bustag]

Great idea :mrgreen: