SPEEDO GAUGE

[TRYME]

JUST PUT IN ALL NEW GAUGES
EVERTHING WORKED EXCEPT SPEEDO
LIVORSI GAUGE 30-100 MPH
I PUT THE HOSE ON BACK OF ITBUT IT STILL DOESN'T WORK
CAN ANYONE SHOW ME A OICTURE WHERE IT WOULD GO ON MY OUTDRIVES
TWINS BRAVO ONES
BAJA 320ES

THANKS IN ADVANCE FOR YOUR CONTINUED SUPPORT

[SuperV]

It should be on the Transome! Near the plug in the middle :mrgreen:

[tommynitro]

The speedo tube gets its reading form the leading edge of the outdrive. There is s small hole about 1 inch up from the bullet shape of the lower unit that get clogged up very easily. Try cleaning it out with a small drill bit, by hand at first, or a stainless piece of wire. Also chack to make sure the yellow speedo pitot is twisted into the drive correctly. The get left of alot sometimes.

[smilie=042.gif]

[TRYME]

THANKS
I WILL LOOK WHEN I GET BACK UP THERE
YOU WOULDN'T HAVE A BLOWN UP VIEW FROM A MANUAL WOULD YOU?
THANKS AGAIN

[Griff]

If it starts at 30 mph, you may not have enough h2o pressure to get it to move. Try some compressed air.